The STAR experiment

We separate these TOF match efficiency from Hijing study for different particle species.
 

 The adc distribution is pretty weird for this west MXQ QTin6 channel, majority of the reasonable TACs have adc<10, the same issue as

The point behind a timing scan is to systematically shift the time of the ADC gate, and measure how the MIP peak responds.  When we are optimally inside the gate, the MIP peak will be lar

We would like to request to create two new DB tables for storing PXL/IST simulator parameters, particularly for hit efficiencies that can be used both for fast and slow simulators.

Some basic instructions for using Run Control + some specific trouble shooting problems for the EPD can be found at:

• 2014 w/ 5% TPC smearing and p-dependent HFT inefficiencies available
• Hijing sample ...

Time	Talk	Presenter
16:00	Sample Production ( 00:20 ) 0 files
16:20	Plots for Discussion ( 00:20 ) 1 file
16:40	Action Plan ( 00:20 ) 0 files

Run 19130051

 Mapping tests done after the swapping of a QT32B.  There is a channel that is acting strangely (WPP3TT9).

 

Summary for the moment:

 We needed had previously used zip ties with small labels as stand offs to keep the fiber bundles away from the magnet busbars, since they get hot (~130 F when measured with an IR thermometer) (s

 Attached are the seven pattern file outputs confirming our mapping just before the run.

Since some boards had been swapped since the last vped scan, the procedure was repeated.

The runs are:
19068022 CAMAC OFF EPD_TUFFmap.txt

NICA Days 2017 proceedings v2