P06ib: Pi minus 0.20pT0.30_0nch1000
|
The Following are the results for dca distributions for
different pT bins in Pi Minus. The results of dca agrees reasonable for
the cut-off of 2 cm and above. These plots were done using the macro
plot_dca.C
void plotHits()
{
gROOT->LoadMacro("~/mymacros/Utility.C");
// f = new TFile("PiPlus200_SimDb_p2.root","read");
//f = new TFile("PiMinus200_SimDb_lowTest_03pt04.root","read");
#ifndef __CINT__
#include "TROOT.h"
#include "TSystem.h"
#include
#include "TH1.h"
#include "TH2.h"
#include "TH3.h"
#include "TFile.h"
#include "TTree.h"
#include "TChain.h"
P06ib:
6050022_1050001.28606: /eliza5/starprod/embedding/P06ib
6050022_1050001.7247: /eliza5/starprod/embedding/P06ib
6050022_1060001.3717: /eliza5/starprod/embedding/P06ib
6050022_1070001.10533: /eliza5/starprod/embedding/P06ib
Missing /Dead Areas 
Updated on Tue, 2009-05-05 13:44 by testadmin. Originally created by deph on 2006-12-07 15:43.
Under: Below is a listing of adjustable mysql performance parameters, their descriptions and their current settings.
Updated on Tue, 2009-05-05 13:16 by testadmin. Originally created by wbetts on 2006-12-07 15:39.
Under: Set up an environment consistent with the STAR db environments. - Create a user named 'mysql' and a group 'mysql' on the system.
- Create a directory for the mysql installation a
Test done on P07ib - Doing claibration on dE/dx
Files: pdsf>/eliza1/starprod/embedding/KstarM* ( July 31 2007)
The Following are the results for dca distributions for
different pT bins in Pi Minus. The results of dca agrees reasonable for
the cut-off of 2 cm and above. These plots were done using the macro
plot_dca.C Event Selection Criteria * Production: P06ib * Vertex restriction: |x|<3.5cm, |y|<3.5cm, |z|<25.0cm * N Fit points >= 25 * DCA < 3 cm
 | 
Updated on Thu, 2006-12-21 19:14. Originally created by kocolosk on 2006-12-07 14:06.
Under: Introduction:This page compares the online and first offline calibrations. The online calibration table was generated during data-taking using a single long run processed through fastOffline production and uploaded on March 30th. It uses slopes to set the relative gains in an eta-ring and then normalizes the eta-rings using MIPs. The first offline calibration uses a significant fraction of the produced transverse and late longitudinal runs. It sets the relative gains using MIP peaks and then uses electron E/p to set the absolute scale. It was uploaded on December 7th.
Updated on Thu, 2006-12-07 13:38. Originally created by nieuwhzs on 2006-12-07 13:38.
Under:
Updated on Wed, 2007-03-21 18:25. Originally created by kocolosk on 2006-12-04 17:59.
Under: This page compares the new tower calibration performed using only electron E/p to the calibration using last year's algorithm. The two calibrations are found to be consistent within 120 MeV in E_T.
Updated on Fri, 2007-03-02 09:15. Originally created by balewski on 2006-12-04 13:22.
Under:
- xx xx, 200x
- next, I forgot to edit this
- Feb 12, 2007
- Will, run7 plans,
- Will, Jan, Endcap startup plan
- L2 algos plan: Upsilon+displVartex (by Pibero), modified L2gamma (by Saski & Jason), L2pedMon (by Jan) . some links , not much time to implement
- Jason, pi0 from Endcap from 2006 data, efficiency is low
- Will, BPRS-East gross mapping problem found, plan to replay data w/ all known corrections.
- Scott, Endcap calibration, MIP peak seen in towers, pre,post
- Jan 29, 2007
- Oleg, Barrel electronics
- Jason, new display of Endcap points,clusters , code & writeup will be in CVS soon, needs special TTree as input
- Jan, embedding of TPC+EMC is working, but ... needs 600MB for execution, code in CVS, awaits perr reviue
- Murrad, off-line jet phi anizotrophy for B & E-emc JP triggers
- Will, BPRS, suggested correlation between towers & pre-shower swaps, Rory got code from Adam for tracking toward BTOW
- Scott, ESMD calibration ready for DB upload, only slopes are used, flavor='slopes'
- Dec 18, 2006
- Scott, Endcap 2006 calibration will be done, status: collecting muDst on the disk
- Will, explained most of the BPRS mapping problems as hadrware swaps, photos of hadrware illustrate the causes
- Naresh, summary of e/h discrimination in the Endcap (ppt) using TPC, dEdx,E/P, and postE, current contamination 14/1, run out of time
- Dec 11,2006
- Wei Ming, evaluation of Endcap pi0 efficiency w/ embedding,
- Jason, M-C e- tracking has eff=~80% for eta<1.6
- Jason, Beam background in Endcap
not seen in 2006, for both: clusters alone & clusters matched
to Pibero's stright through tracks (flag=901)
- Adam, ofl-onl BTOW gains, 136 more towers lost mainly due to the isloation cut
- Rory, BPRS mapping, identified miss-match patterns: +20 towers, backward mapping Y=-X
Updated on Thu, 2008-05-15 11:08. Originally created by balewski on 2006-12-01 14:35.
Under:
Updated on Thu, 2008-05-15 11:06. Originally created by balewski on 2006-12-01 14:22.
Under:
Updated on Fri, 2006-12-01 12:08. Originally created by testadmin on 2006-12-01 10:41.
Under:
Thursday, 1 January 1970
, at 00:00 (GMT), duration : 00:00
Updated on Fri, 2007-10-19 12:40. Originally created by kocolosk on 2006-11-30 15:56.
Under: This is CSMStatusUtils, which outputs the status of either calorimeter to text and root status files. Documentation is by Dave Relyea. The code can be found at
|
|
|
